Endurance offers a universal water cooling system with TEC coolers (Peltier).
Key parameters of the Water TEC chiller (2 x TEC):
Water tank volume: 1.35 liters.
Water pumping speed: 600 ml / min .
TEC cooler power: 2 x 120 watt = 240 watt (adjustable).
TEC cooler power 2 x 60 watt = 120 watt (optimal)
Minimum water temperature: 15-16C (if the outside temperature is ~30-31C).
Reaching the maximum capacity: 30-45 minutes.
Average temperature drop: 1.25C / 5 minutes.
Cooling capacity: 70-80 watt.
Good for: 40 watt Co2 tube, laser diodes, other purposes.
Key parameters of the Water TEC chiller (4 x TEC):
Water tank volume: 2.5 liters.
Water pumping speed: 1.8 Litres/min.
TEC cooler power: 4 x 120 watt = 480 watt (adjustable).
TEC cooler power 4 x (50-70) watt = 200-240 watt (optimal)
Minimum water temperature: 12-13C (if the outside temperature is ~32-33C).
Reaching the maximum capacity: 25-30 minutes.
Average temperature drop: 2.8C / 5 minutes.
Cooling capacity: 140-160 watt.
Good for: 80 watt Co2 tube, laser diodes, other purposes.
Water temperature 17-18C (under 50 watt heat load)
Water cooling system test with diode lasers (2x TEC)
- 2 x diode lasers work full power
- 2 x 4.8V x 4.5A = 43.2 watt
- Heat power ~ 30 watt
- Diode temperature after 30 min of full power laser ~ 26-27C
- Initial water temperature 18C
- Water temperature in the water tank after 30 min of full power laser diodes ~ 22C
- Room temperature ~ 30C
- Water change temperature in a water tank +4C
- Delta temperature between the diode laser and the room temperature ~3-4C